Edit Content


10:00 AM - 09:00 PM

Our Contact


Phone Number


Steps To Take Before Home Renovation

You may have watched television programs on construction and remodelling. For example, it may seem like a good idea to knock down walls to create larger living rooms and closets, but you must be well-prepared and have all the necessary knowledge to avoid damaging your home’s entire structure.

Reconstruction is more challenging than initial building since it can be tough to remove the entire walls upon which the entire structure of the house is built.

In this blog post, you will learn about what to consider before house renovation and how you can make it dreamy. So, take a moment and read the following details about house renovation. 

Steps To Consider Before Home Renovation 

Generally, you have to start from somewhere, and if you are thinking about house renovation, it is necessary to plan before implementation. It would help if you thought about taking the following steps to continue your reconstruction work:

Step #1:

Knowing how much money you have available for this project is a good idea since you can use it as a starting point to determine how much work you can do. The most important component of any endeavor is its budget. Start by identifying the amount of work that needs to be done and putting a cost on it.

Step #2

It is very important for you to speak with a contractor. Bringing the individual who assisted you in the initial design of the space on board is a smart idea. They could take down the necessary walls while preserving the structure’s strength because they would be fully aware of the construction.

Step #3

You need to be completely knowledgeable about the layout of your home. It implies that you should be able to tell your partition walls apart from your load-bearing walls. Partition walls are simpler to tear down than load-bearing walls. 

Installing additional support using steel beams that can strengthen the structure by shifting the weight to another wall is required to remove load-bearing walls. A load-bearing wall, on which the entire home is built, is 9 inches thick, whereas a separating wall is normally 4.5 inches thick.

Step #4

Since concrete is used to construct most homes, increasing the height of the roof is more complex. Comparing a smaller room to a larger one, the top slab can be lifted and relocated with less difficulty, but there are still some issues. This can undermine the house’s construction. Therefore it needs to be carefully considered.

To move the weight, external beams must be placed, and it is generally advised to avoid doing so. Most people who seek to raise their roofs are those whose homes are considered to be of older construction. In that situation, it is even riskier and trickier.

Step #5

Plumbing for the kitchen or bathrooms is the norm for piping work. However, if you decide to rebuild the space completely, you will also need to install a separate sewerage line in addition to a new water pipeline. This requires mapping, which can only be done by experts. So, if you are planning a home renovation, it is necessary to consider this step carefully. 

Final Step:

It’s time to finish the finishing touches and decorations, including any necessary touch-ups to the final painting, backsplashes, floor sealing, light fixtures, and hardware. When a makeover is finished, take some time to appreciate your new surroundings and begin planning your next undertaking.
Therefore, if you want to rebuild your house and are planning to change the appearance of your house, then you can consult with BUON Construction. Their experts will guide you accurately and even make your dream home in reality. So, trust their expertise and contact them right away.